HD300 Wedge Barricade – K Rated Barrier

Certification Level: M50 P1 Crash Rated Barrier
Certified by: ASTM
Model #: HD300
Installation Design: Shallow Foundation Barrier

The HD 300 barrier, available with either a fully electric or hydraulic control unit, will stop a 15,000 pound (66.7 Km) vehicle traveling 50 mph (80 kpm). Upon impact, the barrier remains in its foundation and the opening stays blocked, providing a multiple hit capability.

In its M50 crash test, the HD300 completely disabled the test vehicle, causing severe damage to the occupant department and power train. The maximum penetration recorded was an outstanding -1.8 m on the passenger’s side. The P1 penetration rating was given because the penetration beyond the protected side of the barrier was less than 1.0 m at the lower leading edge of the test vehicle’s cargo bed.

“The HD300 provides many of the flexibilities that security professionals want in a vehicle access barrier,” explains Greg Hamm, Delta Scientific vice president, marketing and sales. “Besides being easy to install and providing a fast emergency fast operation, low maintenance and multiple hit capabilities, customers can select either our new all electric control unit or Delta’s lauded hydraulic control unit.”

HD300 Wedge Barrier Bradley Air National Guard

With its 24-inch (61 cm) shallow foundation and aesthetic design, the HD300 obviates the concerns of interference with buried pipes, power lines and fiber optic communication lines. The shallow foundation also reduces installation complexity, time, materials and corresponding costs. The HD300 is perfect for high water table locations and areas with corrosive soils. It provides low maintenance as all components are accessible from the sides or top of the barrier.

For increased security, the HD300 leverages Delta’s propriety counter-balanced technology to provide a 1.5 second emergency fast operation (EFO), responding to attacks very quickly. The electric actuator provides IP67 protection, meaning that the unit is totally protected against dust and as well as the effect of immersion between 15 cm and 1 m.

HD300 Wedge Barrier at Watervliet Arsenal

Image

HD300 Wedge Barricade Activated at The Watervliet Arsenal

Image

Product Highlights

Certified by: U.S. Department of State

Certification Level: M50 P1

Gross Vehicle Weight: 65,000 pounds/66.7 kN

Crash Speed: 50 mph/80kph

HD300 Operational and Crash Test

HD300 Wedge Barrier | High Security Barricade.

IP67 Electromechanical Actuator – 2nd hit capability, high reliability, 66,000 lb axle load.

Specifications & Resources

HD300 General Arrangement
Drawing

HD300 Foundation Specifications

HD300 Procurement Specifications

HD300 Electric-Hydraulic Barrier Brochure

Other Wedge Barricades

Surface Mounted Barricades DSC1200

Surface Mounted Barricades DSC1200

The new Delta Scientific DSC1200 surface mounted barricade provides a very easy to install high security vehicle access control system for banks, city and federal government offices, museums, corporate buildings, factories, oil refineries, railway, airport and other transportation hubs as well as other facilities threatened by truck bomb attack, errant drivers or car-crashing thieves.
Commercial Parking Control Beam MG139

Commercial Parking Control Beam MG139

The MG137 and MG139 Manual Gates are designed for security applications where the frequency of use does not require an automatic barrier, yet a chain or swing gate is impractical or unsightly. The MG137 features a 2-inch square steel arm while the MG139 features a 3.5-inch round arm.
Surface Mounted Barricades TW2015

Surface Mounted Barricades TW2015

The TW2015 Hydraulic Wedge Barricade System is a one-inch thick ramp that features quick installation. It is designed to install at difficult locations such as parking structure ramps or areas with sub-surface drainage problems and used for intermediate security applications.