Glass to Glass Corner Parking Lot Booths

The standard Delta Scientific booth solves project headaches.

Our standard corner parking lot booths are offered in two different sizes to fit most typical locations. They are designed to provide protection from changing weather environments and to offer security to your facility. Pre-wired to N.E.C. (125 AMP, 120/240 Volt, 6/12 station, single phase), standard booths are fully assembled and ready for service.

Specifications For Corner View Parking Lot Booths

Prefabricated building shipped fully assembled and ready for installation. All structural members meet or exceed ASTM A500. Steel tubing to be 2″ x 2″ x .083. Sheet metal to be 14 GA. CRS, (galvanized/pre-primed). Sliding door fabricated from structural steel with top suspension type, aluminum track ball bearing carriers. Heavy duty steel counter with electrical access port. Glass to glass corners with 1/4″ clear/tinted tempered safety glazing and concealed interior fasteners.

Glass to Glass Corner Parking Lot Booths | Delta Scientific
Glass to Glass Corner Parking Lot Booths | Delta Scientific

Fluorescent light fixture with (2) 40 watt tubes and a single pole switch. Electrical cabinet with duplex outlets, 125AMP, 120/240 volt, 6/12 station load center and 1500 watt heater. All electrical components will be UL approved and installed in accordance with the N.E.C. Finish will be primed and painted in accordance with the standards established by the Steel Structures Painting Council. All primer to be corrosion resistant with a finish coat of two-component industrial paint.

Finish coat to have good fade, impact and chemical resistance, color selection by customer. Contact Delta at (661) 575-1100 for any additional design options including air conditioning, sliding windows, insulation, flooring and other special needs.

  • VK46
  • VK612
  • VK5678 – IL (Shown)
  • VK816
  • VK68

Other Guard Booths

Surface Mounted Barricade DSC1425

Surface Mounted Barricade DSC1425

This quick installation surface mounted barrier has a single buttress that houses all the necessary components to run the unit. Simply bring in power to the buttress side of the barrier and run your control wire to your desired location and you are ready to go. This barrier can be left handed and right handed to cover larger openings or orient the barrier as needed for power.
Commercial Parking Control Beam AG812

Commercial Parking Control Beam AG812

The AG812 Vehicle Access Gate is an all-purpose semaphore type parking control gate for use with wood or aluminum gate arms. It is designed and configured to meet a broad range of vehicle control and parking needs.
Shallow Foundation Bollard DSC600

Shallow Foundation Bollard DSC600

Delta Scientific’s DSC600 Shallow Foundation Bollards protect approaches to buildings, drop-off and passenger loading areas at transportation hubs, storefronts, sports arenas, office buildings and other presently unprotected locations where vehicle bombers and errant drivers have no obstacles.