DSC7035 (H)

DROP ARM BEAM BARRIER SYSTEM

K12 Crash Rated

Features

  • Crash-certified to K12 level: based on full-scale tests of the sister DSC7000 series.

  • Unique high-strength alloy steel shell beam combined with hydraulic actuator in a shallow foundation (~30″ deep) for rapid deployment.

  • Available in hydraulically powered version with integral pump unit or optional battery/solar powered backup.

  • Standard clear opening ~144″ (≈3.66 m) and configurable up to ~288″ (≈7.3 m) for flexible lane control.

  • Engineered for high-security checkpoints where vehicle access must be reliably controlled and crash-threat mitigation is critical.

Delta Scientific Corporation Logo

Certified by:

Delta Scientific

Crash Rating:

Engineer Rated to Stop a 10,000 lb. vehicle at 27 MPH

US Patent #:

Patent Pending

The Series DSC7035 Drop Arm Beam Barrier System incorporates a unique crash resistant arm that is comprised of a special high strength alloy steel shell. It has been analyzed based upon the data from multiple successful tests conducted on its sister barricade the DSC7000 series.

The DSC7035(H) version of this system is operated remotely by means of an integral Hydraulic Pumping Unit (HPU) that is wholly enclosed in the hinge end enclosure. The HPU can be powered from a local single or three phase power source.

Request A Quote

What Is the DSC7035 (H) DROP ARM BEAM BARRIER SYSTEM?

The system consists of a crash beam, bearing assembly, hinge end support buttress and the hydraulic actuator, power unit, locking bolt with padlock provision, mounting hardware and other many other options.

  • ACTUATION. The Drop Arm Barricade is raised and lowered by means of a hydraulic cylinder driven by a Hydraulic Power Unit.
  • CONTROL. The Barricade works with a push from a button mounted either on the Barrier or at the end of a cable umbilical cord.
  • BARRIER HEIGHT. Standing at 33 inches (0,93 M) high, as measured from the roadway surface to the centerline of the crash beam.
  • BARRIER CLEAR OPENING. Standard clear opening shall be 144 in., ranging up to 288 in. as measured inside to inside of the hinge and locking buttress.
  • FINISH. The foundation base of the Barrier shall be asphalt emulsion coated for corrosion protection. Exposed barrier surfaces shall be painted with a gloss white, two-part epoxy high weather resistant paint (or optional galvanized finish).

Watch the In-Depth Drop Arm Beam Barrier System Product Demonstration.

Configuration Options of the DSC7035

A wide range of options available such as Prime Movers, Control Options, Interface Packages, Sensors, Signal Lights, Safety Provisions etc. is available. These include the following:

  • Hydraulic Power Unit. The DSC7035 is configured to operate two, three, or four Drop Arm Barriers.
  • Remote Location. The HPU for the Drop Arm Beam Barrier can be operated remotely.
  • Battery Powered Hydraulic Power Unit. The BHPU is capable to operate up to 4 Drop Arm Barriers.
  • Control Circuits. The control circuit operates up to four Drop Arm Beam Barrier control stations.
  • Remote Control Panels. The Remote panels are able to operate the Barriers from a single or multiple locations.
  • Weather Resistant HPU Enclosure. Equipped with a lockable weather resistant enclosure, its convenient design allows easy access to the HPU for maintenance and emergency operation of the hydraulic system.

EXPERIENCE AND CERTIFICATION

The design and crash rating of this barricade has been tested by the Delta Scientific engineering department based on full scale crash tests of the DSC7000 series beam barricades.

Download Procurement Specs

QUALITY ASSURANCE PROVISIONS

Identification

A nameplate with manufacturer’s name, model number, serial number and year built shall be located at the hinged end structure.

Workmanship

The Barrier shall have a neat and workmanlike appearance.

Dimensions

Principle dimensions shall be checked against drawings and ordering information.

Finish

Coatings shall be checked against ordering information and shall be workmanlike in appearance.

Specifications & Resources

DSC7035 General Arrangement Drawing

Download

Top Assembly General Arrangement

Download

Request a Quote

Contact Us
Request A Quote
Download Catalogue
  • S50 Barrier DSC50

    Mobile Barrier – The ‘’S’’ Barrier – DSC50 – SC30 Crash Rating
    dsc50 The “S” Barrier The smart solution for crowd safety Delta Scientific proudly unveils the DSC50 “S” Barrier, a lightweight, customizable, and rapidly deployable solution designed…
    Read More
  • DSC1500 Portable Beam Barrier from Delta Scientific

    Portable Beam Barrier – DSC1500 – M30 Crash Rated
    The portable barricade sets up quickly and temporarily to block vehicles. With a clear opening of 16 feet (4.8 m), it’s M30 certified.
    Read More
  • Delta’s MP100 Portable Barrier System Successfully Passes PU30/P3 Crash Test

    Portable Barrier – MP100 – Certified M30 / P3 (ASTM F2656-23)
    Whether you’re looking for rapid deployment, easy storage, or flexible transportation, the MP100 Portable Barrier is designed to meet your needs with maximum efficiency and minimal…
    Read More
  • Stadium Security & Protection | Delta Scientific

    Portable Barrier – MP5000 – ASTM M30 and M40 Crash Rated
    The MP5000 is a towable, rapid deployment vehicle barricade.  With setup in 30 minutes, the MP5000 can secure your event quickly and provide emergency vehicle access…
    Read More
  • IP500 Portable Barrier Hoover Building | Delta Scientific Corporation

    High Security Portable Barrier – IP500 – K-4 Crash Rated
    Quick deployment K-4 crash-rated barricade stops a 15,000-pound truck at 30 mph within 20 feet, ideal for various locations.
    Read More
  • DSC900 Portable Barrier | Delta Scientific Corporation

    High Security Portable Barrier – DSC900 – K-4 Crash Rated
    The high security barricade offers protection against vehicle threats at key locations, with quick deployment for manual or automatic operation.
    Read More