|
 |
AG812
BB10M
MG137
MG139
SG1420
|
Delta
manufactures five types of parking
control gates. The AG812, shown
below at Phoenix’ Sky Harbor
Airport, is an all-purpose semaphore
type gate, designed to meet a
broad range of vehicle control
and parking applications.
The
drive train, control/logic module
and cabinet are built to withstand
heavy industrial traffic and
parking control requirements.
The control/logic module is field
programmable across a wide variety
of applications.
|
 |
AG812
All-Purpose Gate
The
AG812 Vehicle Access Gate is
an all-purpose semaphore type
parking control gate for use
with wood or aluminum gate arms. It
is designed and configured to
meet a broad range of vehicle
control and parking needs.
The
drive train, the control logic
module and the cabinet are built
to withstand heavy industrial
traffic and parking control requirements.
Additionally, they include an
interface with revenue systems,
vehicle identification systems,
card readers, remote control
stations and buried detectors. The
AG812 is UL listed. |
 |
BB10M
Barrier Gate
High Security, Heavy- Duty
The
Model BB10M Hydraulic Barrier
Gate is a high security, heavy-duty
gate capable of protecting roadways
up to 33 feet (10M) in width. It
is designed and used for traffic
control and security applications
where the control and restraint
of vehicles is imperative.
The
BB10M is capable of sustained
operations across a wide spectrum
of weather and environmental
conditions.
BB10M
Printable Information .pdf file
|
|
MG137
MG139
Parking Control Gates
For manual
operation
The
MG137 and MG139 Manual Gates
are designed for security applications
where the frequency of use
does not require an automatic
barrier, yet a chain or swing
gate is impractical or unsightly. The
MG137 features a 2-inch square
steel arm while the MG139 features
a 3.5-inch round arm.
The
MG137 can be used for drives
up to 15 feet and the MG139
can be used for drives up to
22 feet. Both can be
installed with minimum equipment.
When down and locked, they
provide a positive restraint
to vehicular traffic. |
 |
SG1420
Parking Control Gate
Similar
to AG812 but handles longer arms
The
SG1420 is a 10 to 18 foot (3m
to 5.5m) double reduction drive
gate. The drive train, the control
logic module and the cabinet
are built to withstand heavy
industrial traffic and parking
control requirements. Additionally,
they include an interface with
revenue systems, vehicle identification
systems, card readers, remote
control stations and buried detectors. Thus,
this gate has all of the features
of the AG812 but handles longer
arms.
It
is UL listed. |
|
|
|
| 
